HCPL-0453 |
RFQ for HCPL-0453 Required Field |
 |
| Technical/Catalog Information | HCPL-0453 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Isolation Voltage | 3750Vrms |
| Input Type | DC |
| Output Type | Transistor with Vcc |
| Current - Output/Channel | 8mA |
| Voltage - Output | 20V |
| Vce Saturation (Max) | - |
| Current Transfer Ratio (Min) | 15% @ 16mA |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC |
| Packaging | Tube |
| Number of Circuits | 1 - Single |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 0453 HCPL0453 516 1033 5 ND 51610335ND 516-1033-5 |
| Product | Manufacturers | Pack | D/C |
| HCPL-0453 | - | - | 02+ |
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
Typical Application |
Features |
| • High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation | • 15 kV/s Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety Approval UL Recognized 2500 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved VDE 0884 Approved VIORM = 630 V peak for HCPL-4503#060 VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/0534)• MIL-STD-1772 Version Available (55XX/65XX/4N55) |
| Parameter | Symbol | Device | Min. | Max. | Units | Note |
| Storage Temperature* | TS | -55 | 125 | °C | ||
| Operating Temperature* | TA | 8-Pin DIP SO-8 |
-55 | 100 | °C | |
| Widebody | -55 | 85 | ||||
| Average Forward Input Current* | IF(AVG) | 25 | mA | 1 | ||
| Peak Forward Input Current* (50% duty cycle, 1 ms pulse width) (50% duty cycle, 1 ms pulse width) |
IF(PEAK) | 8-Pin DIP SO-8 |
50 | mA | 2 | |
| Widebody | 40 | |||||
| Peak Transient Input Current* (1 s pulse width, 300 pps) |
IF(TRANS) | 8-Pin DIP SO-8 |
1 | A | ||
| Widebody | 0.1 | |||||
| Reverse LED Input Voltage* (Pin 3-2) | VR | 8-Pin DIP SO-8 |
5 | V | ||
| Widebody | 3 | |||||
| Input Power Dissipation* | PIN | 8-Pin DIP SO-8 |
45 | mW | 3 | |
| Widebody | 40 | |||||
| Average Output Current* (Pin 6) | IO(AVG) | 8 | m
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models |
